Pulling Grips
The Hook Bail series is used when a connection cannot be made with a
U-Bail. The hook bail series is available in split lace or split rod
configurations. If a split grip is needed, add the following to the
end of the part number: “SL” for split lace or “SR” for split rod.
Single Weave |
||||||
|---|---|---|---|---|---|---|
| Part # | Range | Wk. Load (lbs.) |
Approx. Brk. Stgth. (lbs.) |
Mesh (in.) |
Eye (in.) |
|
| HB-25-SW | See Pricing | 1/4" - 3/8" | 500 | 1000 | 6 | 4 |
| HB-37-SW | See Pricing | 3/8" - 1/2" | 500 | 1000 | 6 | 4 1/2 |
| HB-50-SW | See Pricing | 1/2" - 5/8" | 500 | 1000 | 8 | 4 1/2 |
| HB-62-SW | See Pricing | 5/8 - 3/4" | 500 | 1000 | 10 | 5 |
| HB-75-SW | See Pricing | 3/4 - 1 1/8" | 1000 | 2000 | 12 | 5 |
| HB-100-SW | See Pricing | 3/4 - 1 1/4" | 1000 | 2000 | 14 | 6 |
| HB-112-SW | See Pricing | 1 1/8 - 1 5/8" | 1000 | 2500 | 14 | 7 |
| HB-162-SW | See Pricing | 1 5/8 - 2 1/2" | 2250 | 5000 | 16 | 7 |
| HB-250-SW | See Pricing | 2 1/2 - 3 1/2" | 3000 | 6000 | 18 | 8 |
| HB-350-SW | See Pricing | 3 1/2 - 4 1/2" | 4500 | 9000 | 20 | 8 |
| HB-450-SW | See Pricing | 4 1/2 - 5 1/2" | 6000 | 12000 | 22 | 8 |
Double Weave |
||||||
|---|---|---|---|---|---|---|
| Part # | Range | Wk. Load (lbs.) |
Approx. Brk. Stgth. (lbs.) |
Mesh (in.) |
Eye (in.) |
|
| HB-50-DW | See Pricing | 1/2" - 5/8" | 1000 | 2000 | 8 | 4 1/2 |
| HB-62-DW | See Pricing | 5/8 - 3/4" | 1000 | 2000 | 10 | 5 |
| HB-75-DW | See Pricing | 3/4 - 1 1/8" | 2000 | 4000 | 12 | 5 |
| HB-100-DW | See Pricing | 3/4 - 1 1/4" | 2000 | 4000 | 14 | 6 |
| HB-112-DW | See Pricing | 1 1/8 - 1 5/8" | 3000 | 6000 | 14 | 7 |
| HB-162-DW | See Pricing | 1 5/8 - 2 1/2" | 5000 | 10000 | 16 | 7 |
| HB-250-DW | See Pricing | 2 1/2 - 3 1/2" | 6000 | 12000 | 18 | 8 |
| HB-350-DW | See Pricing | 3 1/2 - 4 1/2" | 9000 | 18000 | 20 | 8 |
| HB-450-DW | See Pricing | 4 1/2 - 5 1/2" | 12000 | 24000 | 22 | 8 |
| HB-TB These grips are constructed of non-magnetic, tin coated bronze. Tin coated bronze is ideal for standard support applications under regular tension. Tin coated bronze grips should always be considered when corrosion resistance and non-magnetism are requirements. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Call 800-290-7752 for pricing and availability
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Affiliated with
