Champion Swivels

808 Champion Swivels
Designed specifically for underground cable pulling applications. Can handle all types of utility cables. Precision machined from high-strength stainless steel.

 

 

821 Champion Swivels
Designed to meet common dimensional specifications, the 821 Champion swivels are designed for underground cable pulling applications, and can handle all types of utility cable. Precision machined from high-strength steel.

CAUTION: To be used for cable stringing or pulling only.
NOTE: Swivels are not designed to run around bullwheels.

 

808 ordering info

Part Number Click on # to view pricing.	Working Load				A---B		C---D		E---F
	*Underground		**Aerial
	(lbs.)	(N)	(lbs.)	(N)	(in)	(in)	(in)	(in)	(in)	(in)
08017000	600	2,669	360	1,601	5/8	.28	3.56	.79	.25	.37
08016000	1,800	8,006	1,080	4,804	7/8	.38	4.51	1.06	.31	.53
08080912	4,000	17,792	2,400	10,675	1 1/4	.56	5.44	1.34	.37	.59
08080913	6,500	28,912	3,900	17,348	1 3/8	.56	5.25	1.31	.44	.56
08080916	8,500	37,808	5,100	22,685	1 5/8	.63	6.51	1.59	.56	.78
08080920	10,000	44,480	6,000	26,689	2	.75	6.99	1.78	.62	.72
08080925	20,000	88,960	12,000	53,378	2 1/2	1.00	10.23	2.80	.87	1.23
08080930	30,000	133,440	18,000	80,067	3	1.31	12.04	3.56	1.12	1.37

* 3:1 Safety Factor   **5:1 Safety Factor

 

 

821 ordering info

 

Part Number Click on # to view pricing.	Working Load				A----B		C----D		E----F
	*Underground		**Aerial
	(lbs.)	(N)	(lbs.)	(N)	(in)	(in)	(in)	(in)	(in)	(in)
08210007	1,800	8,006	1,080	4,804	7/8	.31	3.09	.84	.31	.38
08210012	4,000	17,792	2,400	10,675	1 1/4	.59	4.52	1.22	.38	.44
08210014	7,500	33,360	4,500	20,016	1 7/16	.59	5.13	1.41	.44	.59
08210018	10,000	44,480	6,000	26,689	1 7/8	.75	7.06	1.88	.63	.81

* 3:1 Safety Factor   **5:1 Safety Factor

 

Lewis MFG.

Regular Duty Ball Bearing Swivels

 

"W" Series (Regular Duty) is specifically designed for tension stringing, and assure that conductor will remain in the neutral position during stringing of transmission or distribution lines. These twin race ball bearing swivels are manufactured from high-grade pre-stressed steel. Proper placement of thrust and radial bearing allow thrust and shock loads to be absorbed without affecting rotation of swivel. Pins are screwdriver removable.

 

Part #		Overall Length (A)	Pin Diameter (B)	Jaw Opening (C)	Overall Diameter (D)	Working Load	Approx. Break Stgth.
W-1	See Pricing	5 3/8"	7/16"	5/8"	1 5/16"	5,000 lbs.	15,000 lbs.
W-2	See Pricing	6 1/2"	1/2"	7/8"	1 5/8"	5,400 lbs.	16,200 lbs.
W-3	See Pricing	7 5/8"	5/8"	1"	2"	12,000 lbs.	36,000 lbs.
W-4	See Pricing	8 3/4"	3/4"	1 1/4"	2 1/4"	15,000 lbs.	30,000 lbs.